Spring PCB Connector with lock and release levers - Phoenix Contact

http://www.phoenixcontact.com/pcb-terminal-block/32098_29767.htm

New innovation from Phoenix Contact is the push-in, double level, spring connection with a levered lock and release system. This quick termination technology is aided by a lever that not only locks but also helps on the extraction of the plug

Leviton Evr-Green Electric Car Charging

Evr-Green Electric Car Charging

Leviton offers a complete solution to Plug-In Electric Vehicle (PEV) charging. The Evr-Green product line consists of both portable and fixed-mount chargers and is supported by a certified installation team and extensive customer service.

The Evr-Green line complies with all industry standards and is compatible with all major EV manufacturers.

For more information, please call (877) 338-7473 or visit our site at www.leviton.com/evrgreen.

Checkout all of the Leviton evr-green car charger products.
http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=33338&minisit...

For an overview of the Evr-Green product line and installation services, watch our overview video.
http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=33356&minisit...

PVC Bendit Rundown

http://www.pvcbendit.com

This video is a rundown of the PVC Bendit system. (There is no sound, but is a good presentation and explanation)

Legrand: Electric Vehicle Charger

Learn how Legrand employees get to and from work with the Legrand Volt and EV Charging Station.

For more information, visit: http://www.legrand.us/passandseymour/electric-vehicle-chargers.aspx

Bridgeport Contractor Presentation

Eric demonstrates the many types of the unique and innovative products available from Bridgeport Fittings- designed to help make the electrical contractor's job easier.

www.btpfittings.com

Whole house Surge Protection by Cutler-Hammer, An Eaton Product

Cutler-Hammer whole house surge protection. Surge protection for the whole home of electronics.

http://www.eaton.com/Eaton/ProductsServices/ProductsbyName/Cutler-Hammer/index.htm

QUINT UPS-IQ, intelligent battery control - Phoenix Contact

The QUINT UPS-IQ is ideal for any situation where battery backup is needed and mission-critical systems cannot lose power. It automatically detects the type of battery connected and determines the charging state using three levels of Intelligent Battery Management.

•State of Charge (SOC) -- which indicates the current level of charge and remaining back-up time left
•State of Health (SOH) -- which determines the amount of life span left of battery usage
•State of Function (SOF) -- which determines the performance capability of the battery

www.phoenixcontact.com

Klein Tools VDV Scout Pro LT Tester Kit

The Klein Tools VDV Scout Pro LT Tester Kit tests continuity on data, voice and video connections, and also uses location ID remotes for locating cable runs to wall outlets. The VDV Scout Pro LT also measures cable length, in both feet or meters.

Wiremold: 5 Ways 5 Feet Can Make Big Improvements - Tele-Power Express P...

5 Ways 5 feet can make big improvements to your business -- the Wiremold Tele-Power Express Pole & Pole Extender
More info: http://www.legrand.us/wiremold/poles-and-columns/power-communication-poles/te...

UltraShot® Comparison Video

Harger UltraShot® is compared to another popular product on the market. Check out this video to see how UltraShot leaves the competition up in smoke!

WHIPPER-SNAP® Snap-In Fittings Demo

YOUR BEST SOURCE FOR PATENTED SNAP-IN FITTINGS.

Our patented WHIPPER-SNAP connectors deliver the superior performance, quality and labor savings you expect from Bridgeport. And they remove as fast as they snap in -- ready to reuse.

Key Features:
• Snap-in convenience
• Save time with each installation
• Removeable and reusable
• Complete line
• Fits standard ½" knockout

Whipper-Snap connectors by Bridgeport. For more info, visit: http://www.bptfittings.com/whipper-snap

Pass & Seymour: Check out our New PlugTail Wiring Devices

Learn more about our new PlugTail Wiring Devices from Steve Rood, our Senior Product Manager.

For more information, visit: http://www.legrand.us/passandseymour/plugtail.aspx

How to Install a Leviton Commercial Surge Receptacle

http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=10922&minisit...

How to Install a Leviton Commercial Surge Receptacle

Straight Blade Receptacles

Leviton industrial, commercial, and residential receptacles are provided in a range of ratings from 15 Amps to 60 Amps, and includes a complete selection of NEMA straight-blade and locking configurations as well as non-NEMA locking devices. Receptacles include Hospital Grade, lighted, isolated ground, corrosion resistant, tamper-resistant, surface mount, flush mount, short-strap devices, surge-protection receptacles, Four-In-One receptacles, power receptacles, and more.

http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=10952&minisit...

Bridgeport Expansion Couplings

MIGHTY-MOVE™ Expansion Couplings allow for expansion and contraction in an indoor or outdoor raceway system. Their unique, patented, low profile design is ideal for limited space requirements. MIGHTY-MOVE Expansion Couplings are available in raintight and non-raintight (dry location) models.

For more info, visit: http://www.bptfittings.com/Catalog/CatalogFamily.aspx?CategoryId=33&Famil...

Pass & Seymour: Saving Energy

See how Legrand/Pass & Seymour's Dimmers, Sensors, and Timers can help cut your customers' energy costs by 60% or more.

For more information, visit: http://www.legrand.us/passandseymour/remodeler-safety-upgrades.aspx
http://www.legrand.us/passandseymour/remodeler-energy-saving-upgrades.aspx

BC1304-LHTQ & BC2304-LHTQ - Thomas & Betts (english version)

Device boxes gangable BC1304-LHTQ and not gangable BC2304-LHTQ. Installation instructions and description of their components and their advantages.
Thomas & Betts 2011

http://www.tnb.com/

How to install a Leviton Motor Starter Switch and Motor Starter Box

http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=10042&minisit...

How to install a Leviton Motor Starter Switch and Motor Starter Box

AC Motor Starting Switches

Leviton's line of industrial grade AC Manual Motor Controllers provide safe, reliable control of a variety of motor loads. Typical applications include manual ON/OFF switching control of bottling lines, pumping machines, air compressors and other heavy manufacturing equipment. These Motor Controllers are available for both single-phase and three-phase applications, with a continuous current rating at all voltages up to 600V AC and maximum horsepower ratings of 20HP.

Motor Starter Box
http://www.leviton.com/OA_HTML/ibeCCtpItmDspRte.jsp?item=370750&section=1...

Cablofil: FAS Rack Ground Mount PV Support System

FAS Rack™ reduces on-site racking labor up to 75% when constructing large-scale solar arrays.

More info or request a quote at: http://www.legrand.us/fasrack

Greenlee Utility Cutters Overview

Utility Cable Cutter, Guy Wire, ACSR Wire, Rebar, Threaded Rod, Aluminum conductor steel reinforced.

http://www.greenlee.com/

TVB613 - Recessed TV Box for Power and Low Voltage

Arlington's recessed TV BOX™ for new or old work allows LCD and plasma TVs to be placed flush against the wall. Its double-gang, combo box design allows you to install two duplex (power) receptacles -- or you can use the box separator to install one low voltage device and one power duplex receptacle. There are also two additional built-in mounts for low voltage, data/media connections like speakers, satellite TV, surround-sound, etc. The 13" wide, non-metallic TV BOX mounts securely between 16" on center studs.

Please visit our site for additional information: http://www.aifittings.com/

Leviton Evr-green Portable 120 Charger

http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=34760&minisit...

Leviton Evr-green Portable 120 Charger

Leviton's Evr-Green 120 Portable Charger provides the most flexibility for charging your electric vehicle. It can be plugged into any standard 15A receptacle found in just about any house, building or public facility. You won't need to worry about limiting the distance of your trip based on the range of a single charge!

Power Tool Innovators -M12™ Cordless Work Light-Milwaukee ToolTv

Milwaukee Electric Tool Corporation introduces a new M12™ Flashlight designed to provide hands-free light in a compact and lightweight package. Featuring a 90-degree rotating head, the M12™ Flashlight allows light to be projected in any direction. The 49-24-0145 utilizes a 12V LITHIUM-ION battery to provide longer run time and features a Xenon incandescent bulb that maximizes brightness of the beam over a specific work area. An integrated magnet provides hands-free use and a lightweight, compact design provides superior durability and portability.

http://www.milwaukeetool.com/.

Pass & Seymour: Feeling Safe

Check out an impressive line of electrical devices from Legrand/Pass & Seymour that are designed to not only enhance safety, but are required by the National Electrical Code® as well.

For more information, visit: http://www.legrand.us/passandseymour/remodeler-safety-upgrades.aspx
http://www.legrand.us/passandseymour/remodeler-energy-saving-upgrades.aspx

Fluke Customer Testimonial: Seafreeze Cold Storage

See more about Fluke Products at http://www.fluke.com/

REDLITHIUM™ Cordless LITHIUM-ION Power Tool System-Milwaukee Power Tools...

Milwaukee Electric Tool revolutionized cordless power tools by introducing the world's first Lithium system, and began the industry-wide transition from NiCad to Lithium. As the clear leader in cordless battery development, Milwaukee continues to demonstrate unrelenting commitment to innovation as they introduce the next generation of Lithium technology. RED LITHIUM™ batteries will provide unmatched run-time, performance and durability for the professional tradesman.
www.milwaukeetool.com

Madison Electric Clip It Presentation

See more about Madison Electrip Cip It products at www.meproducts.net/clip-it/

Hot PVC Bender

This is the big hello from us to you. (It even includes a hello from Vic Johnson, the inventor of the PVC Bendit) Suspend judgement until you've checked out the majority of the site, and you will probably find that the PVC Bendit is perfect for you.

It's a heating element that slips inside of the PVC pipe to ensure even, efficient and easy heating. Available in lengths of 3', 6' and 9', it's the longest PVC bender on the market.

http://www.pvcbendit.com/

topVOX Voice at Thomas & Betts

Thomas & Betts is a leading manufacturer of electronic, mechanical and utility product. See voice in action at the T&B distribution center in Bromont, near Montreal.

MIGHTY-BOND™ Grounding Products Demo

Watch our demonstration of the innovative MIGHTY-BOND™ grounding and bonding products available from Bridgeport Fittings.

For more information, visit: http://www.bptfittings.com/Catalog/CatalogSubCategories.aspx?CategoryId=32

Power Tool Innovators - M12™ Cordless Heated Jacket - Milwaukee Power To...

Milwaukee Tool, the leader in power tool technology, introduces the M12™ Cordless Heated Jacket. Powered by the revolutionary M12™ RED LITHIUM™ battery, the M12 Cordless Heated Jacket delivers unparalleled comfort to users on and off the job site. This multi layered soft shell jacket utilizes new cold weather technology to actively warm the body and stimulate blood circulation. Three sewn in carbon fiber heating zones distribute heat to core body areas, with a stylish performance-fit that gives users maximum flexibility and comfort during use. The 2331 M12™ Heated Jacket features three heat settings, for varying heat needs and is water and wind resistant for a variety of weather conditions. Ideal for cold job site conditions and cold outdoor sports and activities, the M12™ Heated Jacket delivers continuous heat for up to 6 hours per battery charge. www.milwaukeetool.com

MIGHTY-SEAL™ Jacketed MC Cable Connectors Demo

See how easy installation is with Bridgeport's UL listed MIGHTY-SEAL™ jacketed MC cable connectors.

For more info, visit: http://www.bptfittings.com/Catalog/CatalogFamily.aspx?CategoryId=11&Famil...

Wiremold: How to Install the Flat Screen TV Cord & Cable Power Kit

The Wiremold Flat Screen TV Cord and Cable Power Kit is easy to install. No electrician or hard wiring is required and installs in under 30 minutes.

Greenlee Gator Grip Demo Video

Maximize contractor productivity by reducing cable pull set-up times:

FAST, EASY Installation in 2 minutes! Use the Greenlee EK12IDL or HK12ID crimping tool to crimp any size of regular, compressed & compact copper and aluminum cable from 1 AWG to 1000 Kcmil without having to change dies.
VERSATILE - Use with copper and aluminum stranded cables (both regular, compressed and compact stranded).
ONLY 6 GRIPS NEEDED to cover cable sizes from 1 AWG through 1000 Kcmil.
PARALLEL UP TO 5 CONDUCTORS on the same reel with no overlap.


Saves Contractors 20+ minutes of set-up time per grip!

Easy installation to the rope for pulling in 2 minutes as compared to the 20+ minutes it takes to attach a pulling head.

Line up the wire to be crimped with the strip line and the open end of the wire grip. This is the length of the wire jacket you want to remove.

Insert the stripped wire into the grip up to the strip line.

Crimp on the first crimp line using a Greenlee EK12IDL or HK12ID dieless crimping tool. Rotate the crimping tool 180° to the other side of the wire grip and crimp on the second crimp line.

Attach the eye on the grip harness to a pulling swivel or rope clevis.

http://www.greenlee.com/

Pass & Seymour: Doing More

Add functionality, reduce clutter, and solve problems with electrical upgrades that do more from Legrand/Pass & Seymour.

For more information, visit: http://www.legrand.us/passandseymour/remodeler-safety-upgrades.aspx
http://www.legrand.us/passandseymour/remodeler-energy-saving-upgrades.aspx

Cablofil: Underfloor Cable Management System

More info at: http://www.legrand.us/cablofil.aspx

MIGHTY-BITE™ PUSH-EMT™ Connectors & Couplings Demo

MIGHTY-BITE™connects EMT conduit faster and easier than ever before. Simply push a MIGHTY-BITE fitting onto the conduit and you have a secure connection in seconds. It's another mighty good time-saver. From Bridgeport, of course.

For more info, visit http://www.bptfittings.com/MightyB

Pass & Seymour: Kick Even More Tail - PlugTail Sensors

Learn how to kick even more tail with Legrand/Pass & Seymour's PlugTail Sensors.

For more information visit:
http://www.legrand.us/passandseymour/plugtail.aspx

Klein Tools 1/4" Laser Etched Steel Fish Tape

The Klein Tools 1/4" Laser Etched Steel Fish Tape is previewed. For more information, visit http://www.KleinTools.com.

QuickLATCH™ - Pipe Hangers

Arlington's NM1900 - NM2090, QuickLATCH™ Pipe Hangers, are one-piece, non-metallic, and UV rated. Use them wherever you would use a pipe hanger!

Please visit our site for additional information: http://www.aifittings.com

Pass & Seymour: How to Install a Harmony Dimmer

Learn the simple process on how to install a Legrand/Pass & Seymour Harmony Dimmer.

For more information visit: http://www.legrand.us/PassAndSeymour/Lighting-Controls.aspx

Klein Tools Fish Rods

The Klein Tools flexible fish rod is previewed. For more information, visit http://www.KleinTools.com.

Process safety from the Offshore Technology Conference -- Phoenix Contact

SIL applications require predictable and reliable behavior. Phoenix Contact provides safe process solutions that consistently meet that requirement. Check out our safety highlights from the 2011 Offshore Technology Conference, including the PSR-Trisafe safety controller and our extensive family of safety relays designed specifically for process applications

http://www.phoenixcontact.com/signal-level-matching/31253_14966.htm

Pass & Seymour: How to Install a Tamper-Resistant Receptacle

Learn how to install a Legrand/Pass & Seymour tamper-resistant receptacle and it's benefits for your home.

For more information, visit: http://www.legrand.us/passandseymour.aspx

Klein Tools Laser Etched Steel Fish Tape

Klein Tools 1/8" Steel Fish Tape with laser marks available at http://www.KleinTools.com.

Fan & Fixture Mounting Box with Adjustable Brackets for New Construction

Arlington's FBX900 mounts fans and fixtures on cathedral ceilings between two framing members for perfect centering within the room.

Please visit our site for additional information: http://www.aifittings.com

On-Q: Unity Home System FAQs

Watch as Tom Cunningham, the Product Manager of the Unity Home System product line, answers some of the most frequently asked questions about the system.

For more information on the Unity Home System, visit http://www.legrand.us/home-systems/unity-home-system.aspx

Klein Tools Nylon Fish Tape

Klein Tools 3/16" Nylon Fish Tape available at www.KleinTools.com.

Recessed TV Box for Power and Low Voltage (Old Work)

Arlington's recessed TV BOX™ for new or old work allows LCD and plasma TVs to be placed flush against the wall. Its double-gang, combo box design allows you to install two duplex (power) receptacles -- or you can use the box separator to install one low voltage device and one power duplex receptacle. There are also two additional built-in mounts for low voltage, data/media connections like speakers, satellite TV, surround-sound, etc. The 13" wide, non-metallic TV BOX mounts securely between 16" on center studs.

Please visit our site for additional information: http://www.aifittings.com/

Pass & Seymour: How to Install a Decorator Switch

Learn how easy it is to add a stylish look to your home. Watch how to install a decorator switch with screwless wall plate from Legrand/Pass & Seymour.

For more information, visit: http://www.legrand.us/passandseymour.aspx

Controller Ethernet highlights from the Offshore Technology Conference (...

This video from the 2011 Offshore Technology Conference shows Phoenix Contact's scalable control platform. Products range from small, modular PLCs, like the ILC100 series, to high-end industrial PC-based control systems like the Valueline industrial PC platform.

Phoenix Contact control products can be used for applications such as offshore drilling rigs, gas and oil refinery control or redundant control of critical control systems.

http://www.phoenixcontact.com/lean

http://www.phoenixcontact.com/mGuard

Klein Tools 1/2" Conduit Bender and 3/4" Conduit Benders

The Klein Tools 1/2" Conduit Bender and 3/4" Conduit Benders are previewed. For more information, visit http://www.KleinTools.com.

Cablofil: Cablo-Port Rooftop Support System

Learn about the features and benefits Cablo-Port rooftop support system. More info: http://www.legrand.us/cablofil/rooftop

Intersystem Grounding Bridge

Arlington Industries GB5, Grounding Bridge, is available in zinc or bronze. It provides reliable intersystem bonding between power and communication grounding systems. Comes with textured, paintable, white cover. Cover is UV rated plastic for long outdoor life.

Please visit our site for additional information: http://www.aifittings.com

How to troubleshoot using a Safety Controller - Phoenix Contact

One way a safety controller differentiates itself from a safety relay solution is by using advanced diagnostics to troubleshoot machine safety circuits. The PSR-TRISAFE safety controller from Phoenix Contact uses LEDs for visual I/O fault indication. The no-charge, no licensing fee configuration software, available for download at www.phoenixcontact.com/trisafe, can help to pinpoint the e-stop or machine guarding failure.

http://www.phoenixcontact.com/trisafe

Wiremold: Introducing the Evolution Series Floor Box

Now one floor box works everywhere - and changes everything. The Evolution Series Floor Box from Legrand/Wiremold.

More info at: http://www.legrand.us/wiremold/evolution-floor-box.aspx

Klein Tools Punchdown Tool

A preview of the Klein Tools Punchdown Tool

Cam-Kit™ by Arlington

Arlington's NEW security camera mounting kit. Universal bracket mounts to 3-1/2" and 4" found or octagon boxes and single-gang device boxes. Also fits FL430 Cam-Light™ Box.

Please visit our site for additional information: http://www.aifittings.com

Pass & Seymour: Sensor Lighting Controls

Learn about Legrand/Pass & Seymour's Sensor Lighting Control product offering.

For more information, visit: http://www.legrand.us/lighting-controls.aspx

Principle of Intrinsic Safety - Explanation of Intrinsic Safety Technolo...

Video explains and demonstrates the basic priciple of Intrinsic Safety Technology works.

See much more at http://www.phoenixcontact.com/

IF MACX Analog EX - Introduction of MACX MCR-EX product family - Phoenix...

Brief explanation on key features of the MACX MCR-EX product, focusing on Narrow housing width, T-Bus connection bridging system, and International Approvals.

See more from Phoenix Contact at http://www.phoenixcontact.com/.

Klein Tools Step Drill Bits

A preview of the Klein Tools Step Drill Bits.

See the entire line of tools at http://www.kleintools.com/

Pass & Seymour: Introducing Electric Vehicle Chargers

Learn about Legrand/Pass & Seymour's innovative and reliable electric vehicle charging solutions. See how EV Charger technology could impact your business.

For more information, visit: http://www.legrand.us/passandseymour/electric-vehicle-chargers.aspx

Cablofil: Installing Cable with Wire Mesh Cable Tray

Cables can easily pulled into the Cablofil cable pathway using FAS Roller.

To learn more visit: http://Legrand.us/Cablofil.aspx

Klein Tools Adjustable Hole Saw

A preview of the Klein Tools Adjustable Hole Saw.

See more at http://www.kleintools.com/.

Outlet Box with Two Threaded Openings

Non-metallic outlet box with two threaded openings to add another outlet box later. UV rated - paintable - plastic for long outdoor life.

Please visit our site for additional information: http://www.aifittings.com

How to wire a motor starter - Phoenix Contact

http://www.phoenixcontact.com/contactron

The key benefits of how to wire a motor starter is demonstrated; using Phoenix Contacts products

IDEAL LanTEK II Product Features

Features of LanTEK II Cable Certifier / Analyzer

For more information regarding Ideal product go to www.Idealindustries.com.

Greenlee NC-500 and 200FP General Overview Video

NC-500 and 200FP General Overview Video.

http://www.greenlee.textron.com/

Demonstration of the QUINT UPS-IQ -- Intelligent Battery Control by Phoenix Contact

http://www.phoenixcontact.com/QuintIQ

This demonstration features the QUINT UPS-IQ; Phoenix Contact's intelligent battery control. The QUINT UPS-IQ is ideal for any situation where battery backup is needed and mission-critical systems cannot lose power. It automatically detects the type of battery connected and determines the charging state using three levels of Intelligent Battery Management.

•State of Charge (SOC) -- which indicates the current level of charge and remaining back-up time left
•State of Health (SOH) -- which determines the amount of life span left of battery usage
•State of Function (SOF) -- which determines the performance capability of the battery

Klein Tools Voice/Data/Video Products

An introduction to the Klein Tools Voice/Data/Video product line.
See more at http://www.kleintools.com/.

Wiremold: Introducing the Evolution Poke-Thru Device

Introducing the Evolution Series Poke-Thru Device.

For more info visit: http://www.Legrand.us/Wiremold.aspx

3-in-1 Premise MULETAPE® From Ideal Industries

Features

•Reduces installation time and saves money on premise jobs
•Thread, measure and pull with single product
•Imprinted with sequential footage or meter markings
•Fewer installation steps, significant material and labor savings
See more of Ideal Industries products at http://www.idealindustries.com/.

Wiremold: Introducing OFR Series Overfloor Raceway

Wiremold OFR Series Overfloor Raceway easily allows you to bring power, communications, and A/V to open spaces.

More: http://www.legrand.us/wiremold.aspx

Tri-Bore™ Multi-Purpose Hole Saws

Features

•Massive carbide tips designed to cut wood with nails, cement board, composite enclosures, ceiling tile and more!
•Faster than self-feed bits in wood
•Faster than carbide grit in abrasive materials
•Available in all popular sizes
•Recessed lighting sizes

See more of Ideal Industries great products at http://www.idealindustries.com/

Wiremold: Get Off the Job In One-Third the Time

Learn how to reduce installation time and costs when using prewired raceway from Wiremold.

To learn more visit: http://www.Legrand.us/Wiremold.aspx

21-in-1 Twist-a-Nut™ Screwdriver From Ideal Industries

Features:

•Wire-Nut® connector wrench reduces finger fatigue and gets in tight spots

•Premium screwdriver ratchet mechanism can handle high torque without failure

•Ergonomic, slip resistant comfort grip

•Heavy-duty chrome vanadium shafts provide robust strength and long life for professional use

•Textured Santoprene™ grip provides excellent torque and resists perspiration, water, oil and chemicals

•Accu-Loop™ Wire Looping Hole

For more information about Ideal Industries products, go to http://www.idealindustries.com/.

Wiremold Organize Cords or Cables and Add Power at Home

See more at www.legrand.us/wiremold/at-home/all-home-ideas.aspx

Sonepar USA Acquires California-Based Independent Electic Supply

This strategic acquisition will position the company for strong growth in the California market.

Philadelphia, PA (August 2, 2011) - - Sonepar USA, a subsidiary of the privately-held Sonepar Group, signed an agreement to acquire Independent Electric Supply, Inc. (IES), headquartered in San Carlos, Calif.
Founded in 1976, Independent Electric Supply is a $400 million electrical distributor operating out of 24 branches in the Northern California area, San Francisco Bay area, Central Valley, Central Coast and Southern California, including one location in Tempe, Ariz. IES holds a strong position as one of the top 20 electrical distributors in the United States, with specialty division houses such as Independent Power System (IPS) and Independent Utility Supply (IUS).

Dave Gabriel, CEO of Sonepar USA, said, “This strategic acquisition provides an opportunity for Sonepar USA to expand its presence through one of the strongest regional distributors in the California market. Gabriel added, "Independent Electric Supply is a company whose organization and employee base exemplifies Sonepar’s most critical characteristics of a customer-centric organization with strong local leadership and local brands.”

Paul Klasing, President of Sonepar USA, said, “We feel there is a solid cultural and business fit between our operations, and we look forward to working together with the associates and management team at IES who will continue to operate under the leadership of Ron Snow, Chief Executive Officer and Tom Massip, President.”

Ron Snow of IES said, “We are very excited about joining the Sonepar team. Sonepar will enable Independent Electric Supply to expand our growth into other markets, which is consistent with our growth strategies.”

IES’ Tom Massip said he agrees. “It’s a great opportunity for our employees to become a part of a vigorous, growth-oriented organization. As is a characteristic of all acquisitions Sonepar has made over the years, we will continue to operate and market ourselves with our existing management team in place and will remain known in the markets we have served for 35+ years as Independent Electric Supply.“
About Sonepar USA

Sonepar USA is made up of the finest locally managed electrical and industrial distributors. Headquartered in Philadelphia PA, Sonepar USA is a member of the Sonepar group, a global player in electrical equipment distribution. The Sonepar Group is present in 35 countries.
About Independent Electric Supply

Independent Electric Supply, Inc. was opened in 1976, as a 10-employee distributorship, serving the needs of electrical contractors laboring in the high-tech aerospace industry. Today, Independent Electric Supply is an award-winning firm, ranked eighteenth in size among the "Top 200" distributors in the nation.
For more information, visit http://www.sonepar-usa.com/ or http://www.iesupply.com/.

Klein Tools Dual Range Non-Contact Voltage Tester

A product overview of the NCVT-2 Dual Range Non-Contact Voltage Tester.

See more at www.kleintools.com/videos/

Greenlee LS50L Battery Powered Knockout Punch Driver

Greenlee LS50L Battery Powered Knockout Punch Driver

See more at http://www.greenlee.textron.com/demos_all.shtml

Phoenix Contact’s PCB Terminal Blocks Save Time & Money

www.phoenixcontact.com/solutioncenter

Find out how PCB terminal blocks and PCB connectors from Phoenix Contact create value-added solutions and reduce installation time and cost when landing discrete wire onto a printed circuit board.

Jefferson Electric Transformers Include Terminal Lugs

Jefferson Electric Transformers Include Terminal Lugs!

Franklin, WI – All standard, ventilated Jefferson Electric transformers (75kVA and smaller) now include terminal lugs.

The terminal lugs are: mechanical style, electro-tin plated and UL listed to 90°C. They support aluminum and copper wires, up to a 600V connection and have a chamfered wire entry for easy installation of wires.

The lug kits are attached at the factory and are also available for purchase separately to support common voltage and kVA combinations. Attachment hardware is included with separate lug kit purchases.

For more information regarding Jefferson Electric, visit http://www.jeffersonelectric.com/.

Harger Lightning & Groundings Ultraweld® UltraShot® Is Re-defining the Exothermic Process

Harger Lightning & Groundings Ultraweld® UltraShot® is re-defining the exothermic process. UltraShot® utilizes a copper container that is consumed along with the weld metal providing for a superior exothermic connection. UltraShot® is fired by an electronic ignition system which consists of a long lasting rechargeable battery controller. This unique ignition system features a six foot cord that allows the user to maintain a safe distance from the reaction. Several advantages of using UltraShot® over conventional processes are labor savings up to 50%, less misfires and less smoke, safer to use and extended mold life. As compared to another product on the market, the long lasting rechargeable battery life is equal to using 84,000 AA batteries! Thats a lot of batteries to put in a land fill. There is also less waste from not using plastic weld metal containers and the product is shipped in bio-degradable cardboard boxes.

See more at http://www.harger.com/.

Arlington’s Recessed Box for Flat Screen TV’s

Arlington's new Steel Recessed TV Box™ (TVBS505/TVBS507) is the best way to create a flush-to-wall appearance for flatscreen TVs, appliances, and more. Now available in 2- and 3-gang (4-Gang - TVBS613), we have a box that will suit your power and low-voltage needs!

Please visit our site for additional information: http://www.aifittings.com/

Hubbell-Automation New High Bay Motion Sensor

Hubbell Building Automation, Inc. Announces HBA WASP2™

Fluorescent High Bay Occupancy Sensor Product Line

January 2011 – Austin, TX – Hubbell Building Automation, an industry leader in the development of cutting edge occupancy sensing technologies and products, announced today the release of the HBA WASP2 Fluorescent High Bay sensor product line.

Designed specifically for high mounting applications such as warehouses, distribution centers, and similar facilities, the HBA WASP2 sensors provide significant energy savings in addition to those typically associated with T5, T5HO and T8 fluorescent fixtures. By using this new sensor, facilities with fluorescent fixtures can expect an additional energy savings from 50 to 90%.

The new HBA WASP2 sensors provide the same key features as its predecessor – single and dual relay versions, easy to configure daylight sensors, and HBA’s exclusive Smart Cycling™ technology that maximizes lamp and ballast life by ensuring that all lamps received even burn time. New enhancements include:

Improved Design – The sensor now comes in two separately orderable components: sensor modules available in low voltage and line voltage versions, and easy to install interchangeable lens options for area and aisle applications.

Surface Mount Versions – In addition to the end mount version which easily mounts directly to fixtures through an extended ½ -inch chase nipple, HBA WASP2 now includes a surface mount version.

Built-In Daylight Sensor – To take advantage of the natural daylight in a controlled area, all models of the HBA WASP2 sensor feature a built-in photo-sensor to override lights off when there is sufficient ambient light. The surface mount sensors have a downward looking sensor and the end mount sensors include downward and upward looking sensors.

Low-temperature/Water-tight Versions – The HBA WASP2 sensor is also available in low-temperature/water-tight versions to support freezer applications and wet location applications. This special version of the sensor modules and lenses are IP65-compliant.

Building Automation System Integration – All low voltage HBA WASP2 sensors include an isolated relay with N/O and N/C outputs for easy integration with HVAC or Building Automation Systems.

For more information about the Hubbell WASP2 product, go to: www.hubbell-automation.com/products/hba_wasp2


About Hubbell Building Automation
Hubbell Building Automation, Inc., headquartered in Austin, TX is a subsidiary of Hubbell Incorporated (A Delaware Corporation). Hubbell Building Automation draws on over 30 years of lighting control experience. As the leading developer of groundbreaking technologies in lighting control panels, HID and Fluorescent controls as well as occupancy sensor controls, Hubbell Building Automation manufactures a complete suite of energy saving lighting control solutions. For further information about Hubbell Building Automation, please visit our web site at www.hubbell-automation.com or contact us directly at {888} 698-3242, {512} 450-1100, or Fax {512} 450-1215.

Arlington's Gangable Plastic Boxes

Forget the old, time-consuming way of making a multiple-gang steel box out of several single-gang steel boxes. Arlington's GANGABLE plastic boxes save time and money - you'll save more than 1-1/2 minutes on a four-gang box alone!

Please visit our site for additional information: htttp://www.aifittings.com

Hubbell Electro Composites Bushings

See more Hubbell products at http://www.hubbell.com/

Hubbell Safety Evaluation for Identifying and Correcting Safety Hazards

Shelton, Conn. – Hubbell Wiring Systems announces a new Safety Evaluation, a step-by-step checklist designed to help customers enhance safety in the workplace. Part of Hubbell’s comprehensive HubbellSafe safety initiative, the new Safety Evaluation is aimed at reviewing the condition of existing wiring devices to identify potential safety hazards and comply with the latest safety codes.

From wet areas, personal protection, and tripping hazards, to temporary power, motor disconnects, and safe repair and maintenance, the Safety Evaluation covers a wide variety of safety issues found in both industrial and commercial working environments. For each potential safety hazard, the Safety Evaluation poses key inspection questions and details related National Electric Code (NEC), NEMA or OSHA requirement. To help correct identified problems, the Safety Evaluation offers possible solutions based on Hubbell’s wide range of products designed to provide electrical safety and code compliance.

“Workplace safety has a significant impact on our customers’ businesses, including employee safety and productivity, machine downtime and production throughput,” says Bob Simon, Director of Industrial Marketing for Hubbell. “Having always put safety first, Hubbell understands the importance of making safety a core value by conducting periodic inspections and maintaining awareness of related codes and regulations. While not all-inclusive, Hubbell’s new Safety Evaluation is designed to help our customers avoid safety problems in the workplace and ultimately reduce risk.”

The new Safety Evaluation is part of Hubbell’s broader safety initiative that includes several resources, including a safety product guide, new landing page on the www.hubbell-wiring.com website and an interactive e-learning course. The new Safety Evaluation is available from the Hubbell Wiring Systems website safety landing page. It can be viewed online, downloaded in a PDF format, or ordered as print copy. To access the Safety Evaluation and learn more about Hubbell Wiring System’s safety initiative, visit the landing page at www.hubbell-wiring.com/safety.aspx

Leviton Revolutionizes the Submetering Industry!

Engineered to provide the best performance in the industry - accuracy, communication, installation and support - Leviton sets the standard. 

The New Leader in Submetering, Leviton includes superior product features at no additional cost:

• ANSI accurate current transformers (CTs) deliver superior revenue-grade accuracy for high-quality, long-term reliability.
   
• Built-in communication features allow for future automation without an additional investment:
• Isolated pulse output channel and RS-485 serial port for easy
  AMR/BAS/BMS system interface
• Series 1000, 2000 & 3000  feature native
  ModBus RTU standard
• Series 2000 and 3000 support advanced communication protocols: ModBus TCP/IP, BACnet MS/TP, BACnet IP and LonWorks
   
• Exclusive reverse phase power and load LED indicators visually confirm that the product is properly installed and functioning
   
• UL 916 Listed for Energy Monitoring Equipment, available in an indoor steel or outdoor NEMA 4X enclosure at the same low price 
   
• Automated data collection solutions and energy reporting/analysis software to easily and intelligently manage energy consumption
   
• Open architecture platform provides for easy integration with third party AMR/BAS/BMS platforms
   
• Backed by the best warranty in the industry at 10 years
   
• Unmatched support from a name you’ve known and trusted for over a century with the largest distribution and customer service base across the country

Only Leviton offers a single source for integrating energy saving solutions for measurement & verification (M&V) and occupancy sensing, dimming and relay lighting controls.

Achieve your green building goals today; visit http://click.icptrack.com/icp/relay.php?r=89563042&msgid=717799&act=U7J3&c=534435&destination=http%3A%2F%2Fwww.leviton.com%2Fmeters

Tork Digital Wall Timer

To see more information go to:

http://www.nsiindustries.com/products/tork/in-wall-timers/in-wall-astronomic-programmable/ss700z-astronomic-in-wall-programmable.aspx

Hubbell Wiring Systems New Lighting Dimmers and Fan Speed Controllers

Shelton, Conn. – Hubbell Wiring Systems is pleased to announce that it has added three new tradeSELECT® control devices to its comprehensive line of incandescent dimmers and fan speed controllers. Each device is designed to provide precise control with a special purpose in mind, while offering an aesthetically-pleasing look to compliment any décor.

A cost-effective option for today’s modern interiors, the new Hubbell TradeSELECT slide lighting dimmer provides a full range of dimming with slide activation—the slide easily slides up to brighten and down to dim. A final push downward of the slide opens the air gap switch for a positive off. Available in white, ivory and light almond, the 600 Watt, 120 Volt slide dimmer features a thin heat-sink design for low-profile installation.

Also available in white, ivory and light almond with a thin heat-sink low-profile design, the new Hubbell TradeSELECT Omni slide dimmer provides precise control over the full range of dimming. The 600 Watt, 120 Volt Omni slide dimmer features an on/off button integrated into the slide. An additional 3-way lead enables single-pole or 3-way capability in a single device for reduced inventory.

The new Hubbell tradeSELECT rotary fan speed controller is a step up from basic 3-speed controllers. Available in white, ivory and light almond, the rotary fan speed dial provides 100% variable control of fan speed to provide more precise airflow for a given environment, enabling better interior airflow management.

See more from Hubbell at http://www.hubbell.com/

Hubbell Ultra High-Density FCR Series Fiber Enclosures

Hubbell Premise Wiring is pleased to introduce a new optical fiber enclosure that offers a 144-port configuration in a 1U space for ultra high-density data center applications.

Part of Hubbell’s FCR Series enclosures, the new 1U high-density fiber enclosure features a three-drawer ultra compact design that provides a flexible, scalable and reconfigurable interconnect apparatus for a wide range of fiber distribution applications. Each drawer accepts four ultra compact 12-port LC to MPO cassette modules that enable channeling of network traffic into small diameter (3.0 mm) 12-fiber cables to minimize congestion, while providing scalability to 40 and 100 Gigabit Ethernet applications through standard MPO backplane connections.

“Today’s storage area networks, advanced fiber interconnections and high-density fiber switches in the data center require space-saving solutions to accommodate maximum fiber ports in a 1U space without compromising accessibility,” according to Jon Lutzen, Senior Product Manager of Optical Fiber Systems. “Hubbell’s new high-density 1U fiber enclosure is the perfect solution to provide density and consolidation, with a simple plug-and-play design for rapid deployment and timely network start-up.”

Available in gray or black, Hubbell’s new high-density 1U fiber enclosure fits easily into 19-inch or 23-inch racks and cabinets. Typical applications require only one enclosure per rack, allowing maximum space for active equipment. The compact LC to MPO cassettes and 12-fiber MPO cords are available in OM3 and OM4 grade multimode, and singlemode optical fibers to support the full range of current and future optical network applications.

See more from Hubbell Premise Wiring products at www.hubbell.com/Electrical/HubbellPremiseWiring

Hubbell Outdoor LED Lighting Products

Laredo LMC

Laredo

Full Cutoff Architectural Wallpack LAREDO LMC Applications

•New! Laredo LMC 18LED and LMC 30LED fixtures provide low installation costs with little or no maintenance and great energy savings. Ideal for schools, factories, hospitals, warehouses and retail applications
•The mid-size LMC is the perfect solution to effective and neighbor-friendly lighting, IDA compliant
•Laredo LED fixtures feature 50,000 hour rated life with a minimum 70% lumen maintenance
•"Quick Mount" adapter allows one person installation without ever opening the luminaire, adapter mounts to wall box and after wiring connections are made, fixture is secured to the adatper
•The Laredo LMC-18LED is available with battery back-up for Egress applications
•Rugged die-cast aluminum housing and door with weather tight protection
•Photocontrol option provides energy-saving, automatic on/off for dusk-to-dawn lighting
•The Laredo LMC Series is designed for mounting heights from 10-18 feet. The soft corner, sloping styling with side rib accents complements a wide variety of building facades.

LAREDO LMC FEATURES

•Full cutoff, Dark Sky compliant perimeter lighting meeting the strictest lighting codes.
•Decorative cast aluminum housing and door. Rugged protection for internal components. Provides heat sink and long ballast life.
•Full cutoff distribution - flat glass and segmented reflector provide wide spread with an environmentally-friendly light control. Standard on HID units, removable 'comfort shield' reduces forward beam projection while maintaining lateral throw, if desired.
•Vertical lamp position (lamp is optional) provides maximum performance and life.
•LED version features 18 – 5000K high CRI LEDs, 44.5 Watts and 2039 lumens
•The compact fluorescent version features one or two lamps and can be ordered with optional ballast battery backup of one lamp for emergency egress applications.
•Three point lag over recessed wiring boxes. Three 1/2" conduit hubs allow feed-thru surface wiring capability. LED units feature "Quick Mount" never open the fixture installation. No conduit hub access on LED units.
•Wide selection of wattage and source including pulse start and electronic metal halide.
•U.S. Patent No. D563,587.

Certifications

•CSA
•Wet listed

Hubbell Programmable Electronic Sectionalizer

3M™ Grafoplast™ TRASP System - Overview

This manual system offers tough marks assembled in the shop or the field without computer or printer. Its pre-printed alphanumeric character elements are loaded into clear sleeves to mark wire, cable assemblies, terminal blocks and devices inside panels.

Arlington's Steel Stand-Off Bracket

Arlington's B44 - 20 gauge steel stand-off bracket - provides rigid support and spacing for a 4x4 metal box installed with all types of raceway systems. Complies with 2008 NEC, overcoming code violations. Provides box support independent of conduit.

Please visit our site for additional information: http://www.aifittings.com

Phoenix Contact Diode Power Supplies

MIDDLETOWN, Pa. – Phoenix Contact’s new Quint Diode power supplies are designed for redundant applications that require isolation and N+1 redundancy. Versions are available for use in both 12-24 V DC and 48 V DC operations.

The power supplies’ housings are made of extruded aluminum for improved cooling and longer service life. This also decreases the heat load in cabinets.

The Quint Diodes use MOSFETs, rather than Schottky or silicon diodes used in most redundant power supplies. These MOSFETs are up to 70 percent more efficient than standard diode components. This limits the effect of a diode module on the load of the power supplies.

The Quint Diodes carry UL 508 Listing as well as Class I, Division 2 Listing, making them well suited for installation in critical process industry applications.

About Phoenix Contact

Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment for a wide range of industries. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 47 international subsidiaries, including Phoenix Contact USA in Middletown, Pa. Phoenix Contact’s formal Integrated Management System is registered to ISO quality, environmental and safety standards (ISO 9001:2008, 14001:2004 and OHSAS 18001:2007).

For more information about Phoenix Contact or its products, visit http://www.phoenixcontact.com/usa_home.htm, or call technical service at 800-322-3225, e-mail info@phoenixcon.com.