Maximize contractor productivity by reducing cable pull set-up times:
FAST, EASY Installation in 2 minutes! Use the Greenlee EK12IDL or HK12ID crimping tool to crimp any size of regular, compressed & compact copper and aluminum cable from 1 AWG to 1000 Kcmil without having to change dies.
VERSATILE - Use with copper and aluminum stranded cables (both regular, compressed and compact stranded).
ONLY 6 GRIPS NEEDED to cover cable sizes from 1 AWG through 1000 Kcmil.
PARALLEL UP TO 5 CONDUCTORS on the same reel with no overlap.
Saves Contractors 20+ minutes of set-up time per grip!
Easy installation to the rope for pulling in 2 minutes as compared to the 20+ minutes it takes to attach a pulling head.
Line up the wire to be crimped with the strip line and the open end of the wire grip. This is the length of the wire jacket you want to remove.
Insert the stripped wire into the grip up to the strip line.
Crimp on the first crimp line using a Greenlee EK12IDL or HK12ID dieless crimping tool. Rotate the crimping tool 180° to the other side of the wire grip and crimp on the second crimp line.
Attach the eye on the grip harness to a pulling swivel or rope clevis.
http://www.greenlee.com/
FAST, EASY Installation in 2 minutes! Use the Greenlee EK12IDL or HK12ID crimping tool to crimp any size of regular, compressed & compact copper and aluminum cable from 1 AWG to 1000 Kcmil without having to change dies.
VERSATILE - Use with copper and aluminum stranded cables (both regular, compressed and compact stranded).
ONLY 6 GRIPS NEEDED to cover cable sizes from 1 AWG through 1000 Kcmil.
PARALLEL UP TO 5 CONDUCTORS on the same reel with no overlap.
Saves Contractors 20+ minutes of set-up time per grip!
Easy installation to the rope for pulling in 2 minutes as compared to the 20+ minutes it takes to attach a pulling head.
Line up the wire to be crimped with the strip line and the open end of the wire grip. This is the length of the wire jacket you want to remove.
Insert the stripped wire into the grip up to the strip line.
Crimp on the first crimp line using a Greenlee EK12IDL or HK12ID dieless crimping tool. Rotate the crimping tool 180° to the other side of the wire grip and crimp on the second crimp line.
Attach the eye on the grip harness to a pulling swivel or rope clevis.
http://www.greenlee.com/